Specifications


What are the specifications of the Track N Go

MODEL
TNG-01
FRAME CONSTRUCTION
Aluminum 6061-T6, High Strength Low Alloy Steel
ASSEMBLY WEIGHT
1,500 lbs. @ 375 lbs. ea.(680 kg @ 170 kg ea.)
TYPE OF VEHICLE

4×4 Vehicles (see vehicle requirements)

Vehicle requirement
RECOMMENDED MAX. GROSS WT.
12,500 lbs. (5,670 kg) GVW,6,250 lbs. (2,835 kg) per axle
TRACK TREAD WIDTH X LENGTH
15 in. (381 mm) X 136 in. (3455 mm)
TREAD STYLE
All-Terrain on side, Self-Cleaning Lug in center
TRACK MATERIAL
Rubber with Internal Composite Rods/Kevlar
RECOMMENDED OPERATING TEMPERATURE
(Ambient) -40°F to +100°F (-40°C to +40°C)
OVERALL WIDTH INCREASE FROM STANDARD
8 in. (200 mm)
INCREASE GROUND CLEARANCE
8 in. (200 mm)
GROUND CONTACT LENGTH
(Hard Surface) 28 in. min. (711 mm min.)(Soft Surface) 64 in. max. (1,625 mm max.)
GROUND CONTACT SURFACE AREA
1,680 sq. in. min. (10,838 sq. cm. min.)3,840 sq. in. max. (24,774 sq. cm. max.)
GEAR-REDUCTION
1:1 (LO mode in snow, HI mode on road)
WHEELS
Press fit mounted on hollow 2.25 in. (57 mm) diameter axle with dual sealed bearing
WHEEL MATERIAL
UHMW & Rubber
PAINT (color)
Yellow
RECOMMENDED MAX. SPEED
40 mph (64 km/h)
TURNING RADIUS
20 to 30°
MAXIMUM OPERATING SIDE SLOPE
25%
MAXIMUM DISTANCE OFF ROAD
Unllimited
MAXIMUM DISTANCE HARD SURFACE
Winter (Unllimited) Summer (10 miles at 30 mph (15 km at 48 km/h))
WARNING: The intellectual property of this system
is protected by law under CIPO:2728865 , USPTO:12/76366
English
French English